- Quality Assurance Policy
- Testing and Analytical Capabilities
- Instrumentation
- Sampling Equipment and Media
- Data Reporting
- Additional Services
AAC's Analytical Capabilities
| Analytical Parameter | Analytical Technique | Agency Method Reference |
|---|---|---|
| Volatile Organic Compounds | GC/MS (SIM or SCAN) | TO-14 |
| TO-15 | ||
| C2 – C12 Hydrocarbons (Ozone precursors PAMS List) | GC/FID/MS | PAMS |
| Total Gaseous Organic Compounds | GC/FID | EPA 18 |
| Fixed Gases (% level) (CO, CO2, CH4, O2, N2, Ar) | GC/TCD | EPA 3C |
| Fixed Gases / Method 18 | GC/FID/TCD | ASTM D1945 |
| ASTM D1946 | ||
| Dissolved Gases (i.e. CH4, C2H4, C2H6 in H2O) | GC/FID | RSK-175 |
| Low Level CO2/CO | GC/TCA | EPA 10B |
| Land Fill Gas / BTU/F-factor | GC/FID/TCD/SCD | ASTM D3588 |
| GC/MS (SIM or SCAN) | AP-42 | |
| BTEX | GC/FID/MS | EPA 18 |
| TO-14 | ||
| Total Reduced Sulfur Compounds | GC/SCD | ASTM D5504 |
| SCAQMD 307.91 | ||
| EPA 16M | ||
| Total Non-Methane Hydrocarbons | GC/FID/TCA | EPA 25 |
| Total Non-Methane Non-Ethane Organic Compounds | GC/FID/TCA | SCAQMD 25.3 |
| SCAQMD 25.1 | ||
| Total Non-Methane Hydrocarbons (Landfill gas) | GC/FID/TCA | EPA 25C |
| Total Non-Methane Hydrocarbons or VOC Content (Waste Streams) | GC/FID | EPA 25D |
| EPA 305 | ||
| VOC and Water Content of Solvent Waste | GC/FID, Gravimetric | EPA 24 |
| Total Organic Carbon | TOC | EPA 415.1 |
| Methanol, C1 to C6 Alcohols | GC/FID | EPA 308* |
| Methanol, Acetone, Acetaldehyde, Methyl Ethyl Ketone, Formaldehyde, Phenol | GC/FID | NCASI 94.02 |
| NCASI 98.01 | ||
| Acetaldehyde, Acrolein, Formaldehyde, Methanol, Methyl Ethyl Ketone, Methyl Isobutyl Ketone, Phenol, Propionaldehyde, VOC's | GC/FID/MS | NCASI 99.02 |
| Methanol, Phenol, Formaldehyde, Acetaldehyde, Propionaldehyde, Acrolein | GC/FID/NPD | NCASI 105.01 |
| Aldehydes, Ketones | HPLC/UV | TO-11A |
| TO-5 | ||
| Formaldehyde, Acetaldehyde | HPLC/UV | CARB 430 |
| Formaldehyde, Acetaldehyde, Acrolein | HPLC/UV | CARB 430M |
AAC's Analytical Capabilities
| Analytical Parameter | Analytical Technique | Agency Method Reference |
|---|---|---|
| Formaldehyde, Acetaldehyde, Acetophenone, Isophorone, Propionaldehyde | HPLC/UV | EPA 0011 |
| Formaldehyde | Colorimetric | EPA 323* |
| EPA 316 | ||
| Phenol, Cresols | HPLC/UV | TO-8 |
| Hydrogen Halides (HCl, HBr, HF) Halogens (Cl2, Br2) | IC | EPA 26A |
| Anions (F-, Cl-, Br-, SO42-, NO3-, PO43-) | IC | NIOSH 7903 |
| Anions (F-, Cl-) | IC | CARB 421 |
| Cations (Na, K, Li and Basic Salts) | Acid Base Titration | NIOSH 7401 |
| Cations (Na, K, Li, Mg, Ca, NH4) and Amines | IC | EPA CTM-027 |
| Amines | HPLC/UV | EPA CTM-027* |
| Sulfur Dioxide | Barium-Thorin Titration | EPA 6 |
| Sulfuric Acid and Sulfur Dioxide | Barium-Thorin Titration | EPA 8 |
| Nitrogen Oxides | IC | EPA 7D |
| Isocyanates (TDI, MDI, HDI) | HPLC/UV | OSHA 42 |
| Organic Acids (i.e. Formic, Acetic, Propionic, etc.) | IC or GC/FID | |
| Phosgene | HPLC/UV | TO-6 |
| PAH's | HPLC/UV | EPA TO-13 |
| Hydrazine | Colorimetric | NIOSH 3503 |
| Aromatic Hydrocarbons | HPLC/UV | NIOSH 5506 |
| Hydrogen Cyanide | Colorimetric | NIOSH 6010 |
| Hydrogen Sulfide | Titration | EPA 11 |
| VOC's for Solvent-Based Coatings, Inks and Other Related Products | GC/FID | EPA 22 |
| EPA 41 | ||
| Blowing Agents | GC/FID | ASTM D-7132 |
| BAAQMD 45 | ||
| SCAQMD 306-91 | ||
| EPA 45 | ||
| Particulate Matter | Gravimetric | EPA 202 |
| PM 10 | ||
| TSP | ||
| % Media Depletion of Activated Carbon | pH/Colorimetric | ASTM D3838 / % Media Depletion |
| Siloxanes | GC/MS | |
| Specialty Projects, Analytes or any Research Work | Please call | Please call |